Please click on question to read the answer.

• 1 Updated parameters due to July 2025 Optus D3 changes
  To check and change the parameter. 1) power the unit on and press the return key twice. 2) highlight "Sat Setting" and press "OK". 3) Scroll down and change/check line by line. 4) Press the return key and then press the left arrow key to highlight "Yes" and press "OK" to confirm. 

  LNB Type: Single

  Low Freq: 10700

  High Freq: 10700

  TP NUM: This will vary

  Frequency: 12567

  Symbol Rate: 30000

  Polarity: V

  22K: Off

  DiSEqc Mode: DiSEqC1.0/1.1

  DiSEqC1.0: OFF

  DiSEqC1.1: OFF

  LNB Power: 13V/18V
• 2 How do I know the unit is charging?

  When the charge light is illuminated the unit is charging, when the light is not illuminated and the charger is plugged in the battery is fully charged.